The difference is only about 1-2mm, so not a big deal.What does pose a potential problem is the fact that the AKE 54mm ExpressCard is shorter than the standard (see picture above). The non-flush ones can also be simply pulled out.Interestingly, the slots on the T60 seem to sit less deep than on the other laptops, which will cause the card (both CardBus and ExpressCard) to stick out a bit more than usual. The level worked well for all cards in this test. A lever mechanism is used to eject the ExpressCard, after which the card pulls out easily. The slot is part of a dual-slot combo, sitting on top of a 54mm CardBus slot, with a single flap door for both slots. To switch to USB3 one needs to unplug it and plug it back in all the way so that it contacts the USB3 PHY first.The Setups and Physical CompatibilityThe adapters were tested in three different laptops.Thinkpad T60, Core 2 Duo T7200 running Windows XP Professional SP3The T60 has a 54mm ExpressCard slot (ICH7-M chipset, PCIe Gen1). Moreover, once the devices made contact with the USB2 PHY, pushing it deeper in the port has no effect. This can lead to an interesting phenomenon – if a USB3 device is partially plugged into the USB3 port, it will make contact with the USB2 PHY, will be picked up by the host and function normally, but only at USB2 speeds.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |